|
Features |
- Torque control
- Pulse count control (Pulse tools
only)
- Angle monitor/control (Nutrunners
only)
- 4 parameter sets
- Statistical reports
- Visual/audible cycle indicators
- Multiple I/O ports
- Fastener counting
- Small size and footprint
- External or PC set up
|
Item |
Part Number |
Use |
|
Sensor Cable Assembly |
909-921-0 |
Connects between tool and main
controller. Lengths up to 60 ft are available |
|
Dual Controller Board Cable |
910-215-0 |
Connects dual controller to tool |
|
Dual Controller Board |
910-201-0 |
|
|
Printer Board |
910-202-0 |
To be used if two or more boards are
required. Complete with flat cable 910-211-0 |
|
Option Box |
910-209-0 |
If two or more option boards are
required |
Required Components:
- Controller Box
- Teachpad
- Teachpad Cable
|
Option Box Cable |
910-207-0 |
Connects between main controller and
option box |
|
Output Board |
910-205-0 |
|
|
Input Board |
910-204-0 |
|
|
RS232C Board |
910-203-0 |
|
|
Option Box Flat Cable |
910-211-0 |
If two or more boards are installed in
option box, the flat cable is required to connect them together |
|
Main Controller Flat Cable |
910-210-0 |
|
|
Cable |
910-622-0 |
Cable from driver box |
