Skip over navigation
Torque Measurement Systems
Tool Support Systems
Distributor Marketing Resources
Hold & Drive
Special Gear Head
Terms and Conditions
AIMCO Tool University
BECOME A DISTRIBUTOR
Controlled Fastening Tools
Gen IV ACE Controllers
iEC4E ACE Controller
iEC4E ACE Controller
This single controller operates the widest range of fastening tools on the market
Request a Quote
Request Product Information
Backward compatible – Works with any Gen III or Gen IV tool from 0.5 Nm – 8,100 Nm.
Bright LED screen – View torque, angle, bolt count, parameter set, job/sequence easily from a distance.
Web browser based programing – Receive data on your PC, tablet, SmartPhone, or any other web-capable device. You can use more than one device at a time: Be in program mode on one device while reviewing real-time curves on another while watching tool diagnostics on a third.
Multiple Fastening Strategies – Program up to 256 parameters with as many as 20 stages.
Jobs capability – 99
Backup & restore through USB or Ethernet
Assignable I/O (8 X 8)
Rundown storage – 20,000 including curves
Event log – 5,000
Real-time curve viewing
Programmable calibration and service alerts
Top exit tool cable option available
Ethernet protocols including Open Protocol, Ethernet/IP and PFCS.
Modular field bus connectivity: PROFIBUS, DeviceNET, Modbus TCP, or any Fieldbus offered by Anybus.
Serial protocols and string output.
Bar code scanning and printing.
Four digit torque display
Secondary display allows user to easily set and toggle through information:
Optional 7” graphical display:
Runs the same software on pc for ease of use.
Real time graphing for application review.
Selectable run screens
LED display: Large numbers can be seen from a distance.
Parameter set display: Displays current parameter set and enables user to quickly change by scrolling up or down.
AcraDyne’s software package is on-board every AcraDyne controller and is provided FREE of charge. This comprehensive, user-friendly program allows programming, analysis, and diagnostics.
The software is based on a standard web browser. This allows you to connect the AcraDyne controller with any computer, tablet, or smart device. Connect through Ethernet, USB, or wirelessly via a network to which both devices are connected.
Adding and editing Parameter Sets (256) and Jobs (99) Is easy and intuitive in the parameter set up function.
View curve results in real time or one of the up to 20,000 stored in memory to program the application for optimal performance.
Tool programming and diagnostics for repair, calibration and advanced troubleshooting.
Several run screens to choose from. The large screen indicators are helpful in viewing real time results of the rundown from a distance.
Height - in
Length - in
Width - in
Gen3 Standard Tool Cable, 3 m Length
Gen3 Standard Tool Cable, 5 m Length
Gen3 Standard/Extension Tool Cable, 10 m Length
Gen3 Standard Lightweight Tool Cable, 3 m Length
Gen3 Standard Lightweight Tool Cable, 5 m Length
Gen3 Standard Lightweight Tool Cable, 10 m Length
Extension Cable, 10 m Length
Extension Cable, 20 m Length
Wall Plate for DC Controller
Table Stand for DC Controller
Mounting Bracket for Gen IV Controller
Gen IV Controller iEC4E Exploded/Outline Drawing
Gen IV iEC Controller Operation Manual