Skip over navigation
Torque Measurement Systems
Tool Support Systems
Distributor Marketing Resources
Hold & Drive
Special Gear Head
Terms and Conditions
AIMCO Tool University
BECOME A DISTRIBUTOR
Controlled Fastening Tools
Gen IV ACE Controllers
iAC4EV ACE Controller
iAC4EV ACE Controller
Provides ultimate flexibility and freedom to command tools for every application
Request a Quote
Request Product Information
Web browser based programing – Receive data on your PC, tablet, SmartPhone, or any other web-capable device. You can use more than one device at a time: Be in program mode on one device while reviewing real-time curves on another, while watching tool diagnostics on a third.
Multiple fastening strategies – Program up to 256 parameters with as many as 20 steps.
Jobs capability – 99. Event log - 5,000
Backup & restore through USB or Ethernet
Assignable I/O (8 X 8)
Rundown storage – 1,000,000
Real-time curve viewing. Curve storage - 20,000
Ethernet Protocols including Open Protocol, Ethernet/IP and PFCS.
Modular field bus connectivity: PROFIBUS, DeviceNET, Modbus TCP, or any fieldbus offered by Anybus.
Serial protocols and string output.
Bar code scanning and printing.
Four Digit LED Torque Display: Large numbers can be seen from a distance
Secondary display allows user to easily set and toggle through information:
Optional 7” Touch-Screen Display:
Runs the same software on PC for ease of use.
Selectable Run Screens
Parameter Set Display: Displays current parameter set and enables user to quickly change by scrolling up or down.
AcraDyne’s software package is on-board every AcraDyne controller and is provided FREE of charge. This comprehensive, user-friendly program allows programming, analysis, and diagnostics.
The software is based on a standard web browser, allowing you to connect the AcraDyne controller with any computer, tablet, or smart device. Connect through Ethernet, USB, or wirelessly via a network connected to both devices.
Adding and editing Parameter Sets (256) and Jobs (99) is easy and intuitive in the parameter set up function.
View curve results in real time or view stored results. As many as 10,000 curve results can be stored in memory.
Tool programming and diagnostics for repair, calibration and advanced troubleshooting.
Choose from several run screens that display easy to view, large screen indicators.
Height - in
Length - in
Width - in
Gen IV iAC Controller Operation Manual