Omega Non-Shutoff Pulse Tool 1/4" Hex Drive

Product: UL-30D
Omega Pulse
Lightweight, Compact, and Ergonomically Superior

Features

  • Non-shutoff operation for lightest weight
  • More power in a smaller package in addition to an air motor redesign
  • The lightest pulse tool on the market today
  • Incorporated driving blade rollers reduce friction inside the pulse unit, maximizing the power in a smaller package
  • Faster pulsing under load for the fastest cycle times
  • Reduced friction means longer tool life

 

Productivity

  • Rollers reduce friction inside the pulse unit, maximizing power in a smaller package. Also speeds up pulsing under load for the fastest cycle times
  • Efficient dual chamber air motor uses 10%-12% less air than previous models
  • High speed of up to 6000 RPM provides fast cycle times

 

Ergonomics

  • Pulse unit eliminates all torque reaction
  • Low noise and vibration
  • Feather touch trigger with interchangeable direction lever (for right or left handed operators)
  • Protective rubber body jacket and comfort rubber grip
  • Directional air exhaust

 

Reliability

  • A redesigned check valve and reset spring contribute to a 25% improvement in torque repeatability
  • A revolutionary o-ring lasts 30%-50% longer with no leakage. Time between fluid changes is extended by over 50,000 cycles

 

Quality

  • No paint on tool - environmentally friendly
  • The accumulator maintains a more constant fluid temperature for more accuracy and less frequent maintenance

 

Add Tightening Monitored Option
The TM option uses the positive air signal upon shut-off for the optional UTM-1500 Fastening Counter

 

When Your Process Requires:

  • Verification of “good cycle”
  • Bolt counting
  • Line control
  • Outputs for lights or alarms

 

What Do I Need?

  • New or retrofitted TM tool
  • UTM-1500 fastening counter
  • Optional digital pressure switch to utilize timer for detecting double hits, cross threading, and stripping (p/n 909-849-0)

    Contact AIMCO for pricing

    Note: Model number ending in "D" come standard with 1/4" Hex quick-change chuck