Gen IV ACE iEC Controller, Top Exit Cable, Profinet Connectivity

Product: iEC4EGVN-T
AcraDyne
For All AcraDyne DC Tools

Features

  • Web browser based programing. Receive data on your computer, tablet, smartphone, or any other web-capable device. You can use more than one device at a time: Be in program mode on one device while reviewing real-time curves on another, while watching tool diagnostics on a third.
  • Multiple fastening strategies – Program up to 256 parameters with as many as 20 steps
  • Jobs capability – 99. Event log – 5,000
  • Backup and restore through USB or Ethernet
  • Assignable I/O (8 X 8)
  • Rundown storage – 1,000,000
  • Real-time curve viewing. Curve storage – 20,000
  • One controller will command any Gen III or Gen IV tool in the AcraDyne line from 1 Nm - 17,000 Nm

Networking Capabilities

  • Ethernet Protocols supported: Open Protocol, ToolsNet, Ethernet/IP, Modbus TCP, PFCS, XML, FTP Client
  • Anybus Field Bus connectivity: Profibus, Profinet, DeviceNet, CC-Link, CC-Link IE Field
  • Data collection
  • Serial protocols and string output
  • Bar code scanning and printing
  • Multi-spindle synchronization

Display

  • Four Digit LED Torque Display: Large numbers can be seen from a distance
  • Secondary Display allows user to easily set and toggle through information:
    • Angle
    • Engineering Units
    • Bolt Count
    • Job / Job Sequence
  • 7” Touch-Screen Display:
    • Runs the same software on PC for ease of use
    • Real-Time Graphing
    • Selectable Run Screens
  • Parameter Set Display: Displays current parameter set and enables user to quickly change by scrolling up or down

Software

  • AcraDyne’s software package is on-board every AcraDyne controller and is provided FREE of charge. This comprehensive, user-friendly program allows programming, analysis, and diagnostics.
  • The software is based on a standard web browser, allowing you to connect the AcraDyne controller with any computer, tablet, or smart device. Connect through Ethernet, USB, or wirelessly via a network connected to both devices.
  • Adding and editing Parameter Sets (256) and Jobs (99) Is easy and intuitive in the parameter set up function.
  • View curve results in real time or view stored results. As many as 20,000 curve results can be stored in memory.
  • Tool programming and diagnostics for repair, calibration and advanced troubleshooting.
  • Choose from several run screens that display easy to view, large screen indicators.

Poka-Yoke Error Proofing

  • AcraDyne’s Gen IV ACE Platform supports any third-party accessory to poka-yoke your process
  • 24V I/O inputs support the outputs of the receiver units
  • Connect click wrenches, crimpers, or any poka-yoked device to your network data collection and line controls with all of the Ethernet protocols and Field Buses offered in the ACE Platform